Форумы Modlabs.net: Забавная вешица для вольтмоддинга - Форумы Modlabs.net

i'm not sure if everything was implememnted that was talked about in the previous thread but that's what it looks to me like:

DDR Maximizer with "vtt tracker" and maybe "Vcore Maximizer" built in and it might connect from one of those green connectors to PCB that is inserted into DIMM slot... i just wonder what is that other wire that comes out of it... maybe the one that one solders to Vcore IC so the Maximizer works wonders for vcore too

EDIT: no, i was wrong... no Vcore Maximizer

- first 2 posts show how it raises vdimm with switches
- next one shows MIN and MAX using trimmer - switches OFF
- next is VTT tracking
- next one shows raising vdimm on DDR2 up to 2.4V
- and the last one shows vdimm on DDR2 at 3v (!) with trimmer.

Some technical info :

Can produce up to 4.22 Volts and up 2.11 Volts separate each other.....

The - max - 4.22 Volts line can produce 25+ A (actually 29 A)......and 34+ A at 3.6 Volts output......A total of 125 Watts power for this line......

The - max - 2.11 Volts line can produce 18+ A (actually 19 A)......and 22+ A at 1.8 Volts output......A total of 40 Watts power for this line......

They are both short cirquit protected and overvoltage protected....

The mainboard(the one on the photos given above) is also thermal protected by it shelf......

At load of 25 A one line and 6 A the other line , it produces about 52 - 54*C of heat.....We are gonna play with 12 A and 3 A max with 2 x 512MB Ram sticks so you'll encode no problem.....

You can feed with this thing , TWO computers at the SAME time , thas 4 x 512MB Rams sticks......It's capable of giving this watage with "joy" IF your PSU's 5Volts line is strong enough to feed it.....

NOMATTER what PSU you have , you'll get the max 4.22Volts for REAL and NOT maybe 3.7 or 3.8 or 3.9 or 4.0 or 4.1 or we will see......You'll GET them......

The whole box will be a 3.5" bay and it will consists of pure alouminum of 1.5mm fatness which will be the heatsing as well as the masiff aluminum where the transistors and the Mos-Fets are screwed on......

That's for now......and we will continue........

E D I T 1. : The front panel face will be in black and alouminum Lian-Lee colors - anodized......
The PCB's will be black with gold(or something like that) letters and components drawing......

E D I T 2. : The MAX voltage faulse at full load a.k.a. 25 A is 10mVolts......