• Stoned Shaman Voodoo graphics Driver 1.0

    08/05/2021 | Бесплатная (FreeWare) | Windows 95, Windows 98, Windows ME

           Shaman Series Graphics WindowsЃ 9X Driver Kit by CIACARA          * Shaman Series Graphics Driver Kit v1.0 * |Ver|Date|Mod| KShaman Installation Driver INF file: 1.00.7521.01 (CIACARA) Shaman Series DirectXЃ Base Driver:     4.10.01.0037 (Q3D 100DB) DirectXЃ 16-Bit Driver: 4.10.01.0037 (Q3D 100DB) DirectXЃ 32-Bit Driver: 4.10.01.0037 (Q3D 100DB) Graphics Property Sheet Driver: 1.01     (Q3D 100DB) GlideЃ    Driver: 2.1.1     (Monster 3D) Glide 2.X one Driver: 2.43.2     (Q3D 100DB) Glide 2.X two Driver: 2.48.00.0455 (IceMan!) Glide 2.X Dos Driver: 2.48.00.0455 (IceMan!) Glide 3.X Driver: 3.04.00.0455 (IceMan!) 3dfx OpenGLЃ ICD Driver: 1.0.0.0505   (CIACARA) Fxmemmap.vxd Driver: 4.11.01.0015 (IceMan!) MicrosoftЃ C Runtime Library Driver: 6.00.8397.0  (IceMan!)     * This Driver Kit was Created and Tested by CIACARA * Disclaimer! * USE THEM AT YOUR OWN RISK!!! * I CANNOT BE HELD RESPONSIBLE FOR ANY EFFECTS THEY MAY HAVE ON   YOUR COMPUTER! * NOTE:   This Driver Kit contains files being made by Q3D and 3dfx.    I did NOT make, edit or modify any of these files,    except for the INF file. What's in the distribution? This distribution contains Opengl, Glide, Glide2x/3x, SLI-DirectX/3D(r)  drivers for Shaman Series Graphics Card Installation  Requirements ------------ - PC with an Intel(r) based processor and i440BX chipset Motherboard - One/Two free PCI slot, according to your Shaman Series video card - Windows 9X Installation ------------ Start Windows and extract the drivers to a temporary directory. Step 1 folder: -------------- Edit the "c:\Autoexec.bat" file and "add" the commands contained  in the "Copy to Autoexec.bat.Txt" file.  If you want to overclock, at your own risk and under your responsibility,  the video card at 52/54/56/58mhz or 60mhz, apply "only" the commands that  you will find in the file contained in the corresponding folder. *  |However, in any case, I recommend installing heatsinks, if not already |  * *  |present, on TMU/FPU and one/two Fans, according to your Shaman Series  |  * *  |video card, to cool the video card anyway.           |  * Step 2 folder: -------------- To perform a clean installation of the new drivers, restart your computer  and start the "RunMeFirst.bat" program. This operation will permanently  delete all Q3D and 3dfx drivers previously installed and present  in the operating system. Step 3 folder: -------------- The installation below can vary depending on which version of Windows is installed.  To determine the Windows 95 version click Start,  Settings, Control Panel. Double-click on the system icon. If the  Windows version is 4.00.950b, Windows 95 OEM SR2 is running. Existing Drivers Installed or PCI Multimedia Device shown in Device Mgr ----------------------------------------------------------------------- 1) Start Windows. 2) Open Device Manager (Start, Settings, Control Panel, System) 3) Locate the existing reference to the card it will be listed as:        Reference Card: Other Devices / PCI Multimedia Device or       Display adapters secondary / Shaman Series 4) Double Click on the card, then click the driver Tab      Windows 95 Standard Release users: Click "Change Driver" and choose                                         "Have Disk"               Windows 95 OEM SR2 users: Click "Update Driver" then click                                         the Next Button.  Click "Other                                         Locations"                        Windows 98 users: Click "Update Driver" then click                                         the Next Button twice on the                                         Detection Dialog Box. Ensure that                                         "Specify a Location" is checked and                                         "Microsoft Windows Update" is not                                         checked. Click Browse to continue. 5) Point the driver location to where the files are extracted to and click    OK.        Windows Standard Release 95 users: Select "Shaman Series Driver for     Windows 9X" from the List and  click OK.                                         Click OK again to save changes in                                         Device Manager.               Windows 95 OEM SR2 Users: Click on Finish to continue.                       Windows 98 users: Click on Next to continue. 6) You MAY then be prompted to insert the "Shaman Series Drivers for    Windows 9X" Disk.  Again, point to the path you extracted the files     to and press OK. 7) Windows will copy the drivers. Reboot the system when prompted 8) Install DirectX 5.0 or higher  (If not already installed) No Current Drivers Installed --------------------------------------------------- 1) Shutdown Windows, Power off the system and install your     Shaman Series Graphics Card into a PCI slot.  2) Restart Windows after hardware installation. 3) Windows will detect a "PCI Multimedia Device", you need to:      Windows 95 Standard Release users: Select "Use Driver from Mfr"                                         and click OK               Windows 95 OEM SR2 users: Click the Next Button on the                                         Detection Dialog Box. Then click                                         "Other Locations"                       Windows 98 users: Click the Next Button twice on the                                         Detection Dialog Box. Ensure that                                         "Specify a Location" is checked and                                         "Microsoft Windows Update" is not                                         checked. Click Browse to continue. 4) Point the driver location to where the files are extracted to and click    OK.  (Windows 98: You will need to click on Next to continue) 5) You MAY then be prompted to insert the "Shaman Series Drivers for    Windows 9X" Disk. Enter the path the drivers are extracted to and press OK. 6) Windows will copy the drivers. Reboot the system when prompted 7) Install DirectX 5.0 or higher  (If not already installed) OpenGL(r) ICD: Known Limitations -------------------------------- The OpenGL ICD included with this kit is meant for use with OpenGL based  games only. It may not be compatible with other applications that use the  OpenGL API for 3D rendering support. ReadMe File: ------------------------------------------------ Original File created by IceMan! Thanks Man! ;-) ------------------------------------------------ Modified and adapted by CIACARA for:  ------------------------------------ Shaman Series Graphics Card ------------------------------------ 3DFX: Gone But Never Forgotten!
    Подробнее »